Fire Hydrant Cost

The fire hydrant is of great importance in times of fire emergency. You may see the fire hydrants alongside the road. These types of hydrants are attached to a big underground water source. Since the Eighteenth Century, there were covered water resources in Asia and Europe. In the nineteenth century, modern water hydrants were introduced, with changes in their structure gradually.

A Fire hydrant is also known as a firelock. It is a connection point by which firefighters can get to big water supplies. A hose is attached to the hydrant, then opens a valve on it to provide a powerful flow of water. The pressure of water can vary according to the region and size of the hose. The hose is then attached to a fire engine, which allows the boost in pressure and split it into multiple streams.

You can expect to pay anywhere between $1,500 to $3,000 for a new fire hydrant. The cost varies depending on the location, capacity, size, and model.

Its actual installation will cost considerably more than the price of the hydrant itself. You can expect to pay anywhere between $4,000 and $8,000 for the installation of a completely new fire hydrant system. These costs can vary from state to state or even from city to city.

If you are going to replace a previously installed fire hydrant, then you may have to buy a new one and budget for its replacement fees. These charges will depend on, which brand you want to use and what are the labor fees according to your location. The average cost of replacement is going to be between $2,000 to $3,000.

You might also like our articles about the cost of a fire suppression system, a fire alarm system, or a fire extinguisher ball.

According to FireHydrant.org, you should be able to find a good quality hydrant for about $1,000, but once you finish with installation and you factor the labor expenses in, you should reach a price of $6,500 overall.

A good quality fire hydrant could be available at a price that starts from just $1,500. It is highly recommended to use quality tools and quality materials to make sure you won’t have to replace it again and again.

Maintenance is a must after you install any device on which you might count one day to save your life. Fire hydrants may need maintenance annually. If there is a need for regular maintenance you can expect a cost anywhere between $20 and $50.

In some conditions, there is a need for digging up deep as the water level can drop. In this case, you may have to spend $3,000 to $4,000 on the drilling.

The usual fire hydrant is made up of different components, which have different functions. These components are:

The above-mentioned components have specific functions. For example, the relief valve allows water to be temporarily released. The cast iron dirt cap provides protection against dirt and other material and keeps it safe from clogging. A breaking ring is a component that allows it to break when a heavy object hits it. The drain valve is the part which drains all the water ensuring no water is left behind to avoid any leakage or burst of pipes in winters.

A combination of these components is what makes a hydrant work. Every brand that makes hydrants offers these functions for all of its products. The difference between different brands will usually be only in the materials that are being used to make the products.

You can usually connect to the fire hydrant using different connectors, but you should be careful when using any hydrant. You should be especially careful while you open or close it. If you open or close it too quickly, this can cause a water hammer, which can cause real damage to nearby pipes.

Anyone planning to use a fire hydrant should know details about its components. They should be aware of every purpose of the component so they can use it properly.

Furthermore, while operating a fire hydrant, firefighters must wear protective equipment for their personal safety. Firefighters should wear gloves, a helmet, and face shields. High-pressure water can cause injuries if anything goes wrong so be careful and take precautions.

You should also remember that it is illegal to park a car near a fire hydrant. In North America, the law states that you can’t park closer than five or ten feet from a hydrant.

Maintenance of fire hydrants annually is of utmost importance to avoid damage resulting in the replacement of the full equipment. Try to find a quality fire hydrant so that it can go for a long run, rather than replacing it again and again.

Dig down deep, when necessary. This will allow you to avoid extra charges associated with completely new installation when you need more water.

Provide proper training to users of fire hydrants. If you will train them, the chances of usage-related damage will be lower.